Shop finishing equipment at Print & Finishing Solutions.

• Automatic start/stop controlled by photo cell
• Patented Electronic Capacity Control (ECC) indicator prevents jams by monitoring sheet capacity levels during operation
• High quality, hardened steel cutting shafts take staples, paper clips, credit cards, and CDs/DVDs
• Quiet and powerful 1 horse power single phase motor rated for continuous high volume
• Sturdy Twin Drive System with fully enclosed gear box housing
• High quality wooden cabinet mounted on casters > Learn More

• Shred Volume: 32 gal
• Dimensions (D x W x H): 18 1/2 x 21 x 36 1/2
• Sheet Capacity: 22-25
• Feed Opening: 12 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn More

• Shred Volume: 32 gal
• Dimensions (D x W x H): 18 1/2 x 21 x 36 1/2
• Sheet Capacity: 22-25
• Feed Opening: 12 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn More

• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 29-31
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn More

• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn More

• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn More

• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 32-35
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn More

• Strip Cut approved Level 2 security
• Can shred up to 52 sheets in a single pass
• Automatic start/stop controlled by photo cell
• ECC (Electronic Capacity Control) indicator helps prevent paper jams by indicating sheet capacity levels during the shredding process
• Automatic oil injection ensures optimal performance at all times
• Wide 12" feed opening enables heavier loads > Learn More

• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 39 3/4
• Sheet Capacity: 37-39
• Feed Opening: 16 Inch
• Electrical Requirements: 115V and 20amp dedicated line
• Horsepower: 2 1/8 > Learn More

• Sheet Capacity: 50 - 52
• Shred Speed: 40 ft/min
• Category: Office / Department Shredder
• Feed Opening Size: 16"
• Cut Type & Size: Strip Cut, 1/4"
• Security Level: P - 2 > Learn More

This compact L’Sealer with Magnetic Hold down and power discharge conveyor with attached Tunnel is only 74 inches in total length. A great machine for low to medium production speeds of 8 to 12 packages per minute.

• Available in 110 volts or 220 volts
• Seal dimension 15 x 19”
• Tunnel dimension 20 x 16 x 6”
• Cycle speed 12 pkgs. per minute > Learn More

This fully adjustable combination L’Sealer with attached Shrink Tunnel includes the latest “Micro-Knife” Technology - No more seal wires to replace.

• Uni-body frame makes this unit easy to move around
• Seal dimension 16 x 22”
• Tunnel dimension 28 x 18 x 8”
• Cycle speed 15 pkgs. per minute" > Learn More