Shop finishing equipment at Print & Finishing Solutions.

A robust model with built in electric lift operation (ELO), 4.5" roller height, wide side pocets for flex face material, side measurements and knife grove for cutting.

• Table Size 5'5" x 10'9" > Learn More

Most popular model for commercial lamination. This is a very strong production machine built for working long shifts uninterrupted. Table surface will accommodate a large number of standard sheets and roller widths currently available on the market.
• Suitable for all types of installation work with self- adhesive materials.
• Workspace 3560x1560 mm 11ft. 8in. x 5ft. 1in.
• Bed size 4000x1600 mm 13ft.1in. x 5ft. 3in.
• Materials 0-70 mm/0-2,8in.
• Required air 6-8bar/87-116psi
• Capacity up to 140 m2/H 1500ft2/H > Learn More

Complete workstation solution for application and cut works.

• Electronic pressure setting
• Heated roller 86F - 140F (optional)
• Remote controlled motorized horizontal drive (optional)
• Multiple height options
• Storage units
• Foldable roller
• Heavy duty > Learn More

Operating at speeds up to 6000 sheets per hour, the “6000” makes fast and easy work of finishing needs.

• Feed sets unglued or glued side
• Accurate .010″ register
• 1 number per head per sheet > Learn More

The GW12000 has production speeds of 12000 sph while maintaining registration and accuracy. It has a 30 inch long register board, individually pressure adjustable perf/score/slit, tireless pneumatic heads, and a conveyor outfeed delivery.

• Up to 100 numbering positions per head per sheet
• Optional slitting blade available
• Heads rotate & lock throughout 360 degrees for perfect register > Learn More

The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More

The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More

Create professional-looking books and documents in 15 seconds or less with the Fastback 20. Easy to use, even with no prior experience, thanks to its intuitive one-touch button. Bind documents from 10 to 700 pages thick with minimal inventory requirements. The Fastback 20 is the perfect binding solution for any office, from small businesses to large corporations. It's fast, easy, and produces high-quality results.

• Binds in less than 15 seconds (3.5x faster than punch & bind systems!)
• Binds thin to thick documents from 10-700 pages (or up to 350 sheets)
• Supports lengths up to 12”, including Letter & A4 paper sizes > Learn More

Perfect for any customer, these precision cutting devices offer repeatable fast cutting on a wide range of media. Perfect for t-shirt transfers, decals, window lettering, cardstock projects and more.

• Available in 29” and 61”
• Continuous crop mark detection
• Three selectable job speeds
• FineCut9 and SimplePop software included > Learn More

The new Apollo XL can cut materials up to ¾” thick. It cuts
cleanly, accurately, without dust and noise. This is the most                                           
affordable heavy-duty cutter available. Available in 4 sizes.
• 3x Quick change tool cartridges
• Integrated laser sight line
• Counter balance reduces operator fatigue
• Two Quick stops for added lateral support
• 5 year guarantee on all parts except bland and cutting wheels > Learn More

The PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges

• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More

The new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.

• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More