Filter Results
- Manufacturer
-
- Graphic Whizard
- Rhin-O-Tuff
- Fujipla
- GBC
- CUTWORX
- Baum
- MBM (39)
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- Challenge (25)
- FastBind (10)
- Formax (9)
- JBI (6)
- Vivid Matrix (3)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- Martin Yale (1)
- Perfecta (1)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
Rhin-O-Tuff ONYX PAL-M Manual Paper Separator
GM-PDI-PALM_ONYXWith the ability to work with various types and sizes of paper, 5.5" x 5.5" to 8.5" x 14", the PAL-M manual paper separator is truly a one-of-a-kind module. A manual lift system, created for simple and easy adjustment allowing the operators to go at their own pace.
• Compatible with APES-14 attachments
• Fits firmly on any vertical OD or HD series machines
• Works with documents from 5.5" x 5.5" to 8.5" x 14"
• 3 Year Warranty > Learn More -
Apollo XL-165 Substrate Cutter
GM-CWT-165The new Apollo XL can cut materials up to ¾” thick. It cuts
cleanly, accurately, without dust and noise. This is the most
affordable heavy-duty cutter available. Available in 4 sizes.
• 3x Quick change tool cartridges
• Integrated laser sight line
• Counter balance reduces operator fatigue
• Two Quick stops for added lateral support
• 5 year guarantee on all parts except bland and cutting wheels > Learn More -
GW Slitter Cutter Creaser
GM-GWH-PT331SCCThe PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges
• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More -
GW PT335 Multi Slitter Cutter Creaser
GM-GWH-PT335SCCThe new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.
• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More -
GW PT8336 SCC Auto Feed/Slit Creasing System
GM-GWH-PT8336SCCThe PT 8336SCC Multi is a complete full-bleed finishing system designed for the digital marketplace. Equipped with interchangeable creasing/perfing dies, the PT 8336CC Multi can quickly switch from perfing to creasing to prevent digital toner cracking.
• 4" deep pile feeder
• Multi accessory output
• 9" color touchscreen
• Built in job creator and 64 job program memory
> Learn More -
Wire Hander f/HD-8000/OD3500
GM-PDI-110066S