Filter Results
- Manufacturer
-
- MBM
- Graphic Whizard
- JBI
- TEC Lighting
- Powis
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- Challenge (25)
- FastBind (10)
- Formax (9)
- Rhin-O-Tuff (9)
- Vivid Matrix (3)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- GBC (1)
- Martin Yale (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- Valiani (2)
- Baum (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
DestroyIt Cross-Cut Shredder 3/16" x 1-1/2"
SM-MBM-2604CC• Shred Volume: 26 gal
• Dimensions (DxWxH): 18 1/2 x 19 1/2 x 36 1/2
• Sheet Capacity: 12-14*
• Feed Opening: 10 1/4 Inch (260 mm)
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$1,846.00 -
DestroyIt Strip-Cut Shredder 3/16"
SM-MBM-2604SC• Automatic start/stop controlled by photo cell
• Patented Electronic Capacity Control (ECC) indicator prevents jams by monitoring sheet capacity levels during operation
• High quality, hardened steel cutting shafts take staples, paper clips, credit cards, and CDs/DVDs
• Quiet and powerful 1 horse power single phase motor rated for continuous high volume
• Sturdy Twin Drive System with fully enclosed gear box housing
• High quality wooden cabinet mounted on casters > Learn MoreUS$1,611.00 -
DestroyIt Paper Shredder 3/16" x 1-1/2" Cross-Cut
SM-MBM-3104CC• Shred Volume: 32 gal
• Dimensions (D x W x H): 18 1/2 x 21 x 36 1/2
• Sheet Capacity: 22-25
• Feed Opening: 12 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$2,189.00 -
DestroyIt Shredder Strip-Cut 3/16"
SM-MBM-3104SC• Shred Volume: 32 gal
• Dimensions (D x W x H): 18 1/2 x 21 x 36 1/2
• Sheet Capacity: 22-25
• Feed Opening: 12 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$1,895.00 -
DestroyIt Paper Shredder, 1/4"
SM-MBM-3804SC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 29-31
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$2,448.00 -
DestroyIt Paper Shredder, 3/16" x 1-1/2" Cross Cut
SM-MBM-3804CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$2,737.00 -
DestroyIt Cross-Cut Shredder (3/16" x 1-1/2")
SM-MBM-4002CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn MoreUS$3,075.00 -
DestroyIt Straight-Cut Shredder 1/4"
SM-MBM-4002SC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 32-35
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn MoreUS$2,737.00 -
DestroyIt Paper Shredder 3/16" x 1-1/2" Cross-Cut
SM-MBM-3105CC• Strip Cut approved Level 2 security
• Can shred up to 52 sheets in a single pass
• Automatic start/stop controlled by photo cell
• ECC (Electronic Capacity Control) indicator helps prevent paper jams by indicating sheet capacity levels during the shredding process
• Automatic oil injection ensures optimal performance at all times
• Wide 12" feed opening enables heavier loads > Learn MoreUS$4,971.00 -
DestroyIt Cross-Cut Shredder 3/16 x 1-1/2"
SM-MBM-4005CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 39 3/4
• Sheet Capacity: 37-39
• Feed Opening: 16 Inch
• Electrical Requirements: 115V and 20amp dedicated line
• Horsepower: 2 1/8 > Learn MoreUS$5,845.00 -
DestroyIt Strip-Cut Shredder 1/4"
SM-MBM-4005SC• Sheet Capacity: 50 - 52
• Shred Speed: 40 ft/min
• Category: Office / Department Shredder
• Feed Opening Size: 16"
• Cut Type & Size: Strip Cut, 1/4"
• Security Level: P - 2 > Learn MoreUS$5,075.00 -
GW Slitter Cutter Creaser
GM-GWH-PT331SCCThe PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges
• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More