Categories: Finishing
- Banding Machines (8)
- Carton Sealers (16)
- Corner Rounders (2)
- Guillotine Paper Cutters (9)
- Die Cutters (1)
- Drills & Hole Punches (5)
- Folders & Creasers (2)
- Laminators & Foiling (2)
- Numbering Machines (2)
- Perfect Binders & Book Trimmers (2)
- Punch & Binding (1)
- Shrink Wrap (4)
- Slitter-Cutter-Creaser (3)
- Other (9)
Filter Results
- Manufacturer
-
- Preferred Pack
- Challenge
- Graphic Whizard
- Bauman
- GBC
- Powis
- MBM (39)
- Akiles (35)
- Horizon (34)
- Morgana (32)
- FastBind (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Vivid Matrix (3)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Martin Yale (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
Challenge CMT-330TC Book Trimmer
GM-CMC-330TC
The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
Fastback Model 20 Binding Machine
GM-MSC-FB20
Create professional-looking books and documents in 15 seconds or less with the Fastback 20. Easy to use, even with no prior experience, thanks to its intuitive one-touch button. Bind documents from 10 to 700 pages thick with minimal inventory requirements. The Fastback 20 is the perfect binding solution for any office, from small businesses to large corporations. It's fast, easy, and produces high-quality results.
• Binds in less than 15 seconds (3.5x faster than punch & bind systems!)
• Binds thin to thick documents from 10-700 pages (or up to 350 sheets)
• Supports lengths up to 12”, including Letter & A4 paper sizes > Learn More -
Excel PreCombo L'Sealer-Compact 110V
GM-PPS-1519ECMC
This compact L’Sealer with Magnetic Hold down and power discharge conveyor with attached Tunnel is only 74 inches in total length. A great machine for low to medium production speeds of 8 to 12 packages per minute.
• Available in 110 volts or 220 volts
• Seal dimension 15 x 19”
• Tunnel dimension 20 x 16 x 6”
• Cycle speed 12 pkgs. per minute > Learn More -
Preferred Pack 1622MK Combo w/Micro Knife
GM-PPS-1622MK_COMBO
This fully adjustable combination L’Sealer with attached Shrink Tunnel includes the latest “Micro-Knife” Technology - No more seal wires to replace.
• Uni-body frame makes this unit easy to move around
• Seal dimension 16 x 22”
• Tunnel dimension 28 x 18 x 8”
• Cycle speed 15 pkgs. per minute" > Learn More -
Combo Fully Automated L'Sealer & Tunnel
GM-PPS-5600COMBO
Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.
• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More -
5300 Combo Fully Automated L'Sealer & Tunnel
GM-PPS-5300COMBO
Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.
• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More -
GW Slitter Cutter Creaser
GM-GWH-PT331SCC
The PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges
• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More -
GW PT335 Multi Slitter Cutter Creaser
GM-GWH-PT335SCC
The new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.
• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More -
GW PT8336 SCC Auto Feed/Slit Creasing System
GM-GWH-PT8336SCC
The PT 8336SCC Multi is a complete full-bleed finishing system designed for the digital marketplace. Equipped with interchangeable creasing/perfing dies, the PT 8336CC Multi can quickly switch from perfing to creasing to prevent digital toner cracking.
• 4" deep pile feeder
• Multi accessory output
• 9" color touchscreen
• Built in job creator and 64 job program memory
> Learn More -
Challenge Paddy Wagon Padding Press
GM-CMC-PAD_WAG
Turn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad
• Sample capacity 15,000 8-1/2 x 11” Sheets
• Portable
• Heavy-duty casters
• Welded tubular steel construction > Learn More -
Challenge PakRak II
GM-CMC-PAK_RAK
Heavy duty construction with side handles. Holds up to 11" x 17" (28 x 43 cm) Stock.
• 500 lb (227 kg) Total Capacity
• 12 Shelves - 4 Fixed / 8 Adjustable
• Portable - Heavy-duty Industrial Casters
• Also available in XL
> Learn More -
Baumann BSB 3L Jogger
GM-PER-BSB3LFor jogging of sheets (either left or right) with a pneumatically driven air removal roller with clamping device, lift stabilizer, and lift pusher. Designed for the most difficult stocks.
• Maximum size: 31 7/16" x 44 7/8"
• Variable pressure air removal roller
• Variable speed air removal roller
• Variable jogging intensity > Learn More
![](/assets/images/defaults/ajax-loader.gif)