Filter Results
- Manufacturer
-
- FastBind
- Graphic Whizard
- Formax
- Rhin-O-Tuff
- JBI
- GBC
- MBM (39)
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- Challenge (25)
- Vivid Matrix (3)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- Martin Yale (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
Rhin-O-Tuff ONYX HD 6500 Heavy Duty Punch
GM-PDI-HD6500ONYXThe HD6500 is designed for the customer who may change dies less often. It offers quick, easy set-up: easy pin pulls and pre set stop positions. This Rhin-O-Tuff HD6500 Onyx Heavy Duty Punch is ideal for mid to high volume commercial and corporate use.
• 14” (356 mm) open ended extra capacity die
• Punch capacity: 40 sheets or 80 pages, 20 lb. bond paper
• Disengageable dies
• 3 year manufacturer warranty > Learn More -
Rhin-O-Tuff ONYX HD8000 14” Wire Closer
GM-PDI-HD8000ONXThe Onyx HD8000 Flat Bar Wire Closer has a wide range of capability and easy to use setting. It offers a a wide, open-ended 14 inch legal size capacity proficient to close books from 3/16 inch to 1-1/4 inch thick.
• 14" legal size capacity
• Closes books from 3/16 inch to 1-1/4 inch thick
• Significant savings on wire costs > Learn More -
Rhin-O-Tuff ONYX HD4170 Electric “Rhin-O-Roll” Coil Inserter
GM-PDI-HD4170ONXDesigned from the best, heavy-duty metal, Rhin-O-Tuff Onyx HD4170 also known as Rhin-O-Roll, provides a fast coil insertion for all pitches and diameters. HD4170 is fully equipped with 12 inch dual powered rollers, with an adjustable lower roller suitable for high performance and more accurate coil insertion.
• Measures document thickness and coil sizing
• 12" binding width
• Stand-alone or attached to vertical OD/HD Series
• Designed for fast coil insertion
• 3 Year manufacturer warranty > Learn More -
Rhin-O-Tuff Automatic Paper Ejector and Stacker Module
GM-PDI-APES_14_ONYXUpgrade your work productivity and Rhin-O-Tuff HD Punch with the ONYX APES-14. The Automatic Paper Ejector and Stacker (APES) module create a one smooth motion of punch, eject and stack operation. The APES-14 easily attaches to your HD7700, HD7000 or HD6500 and handles paper sizes from 5.5" X 5.5" up to 14" X 14" (140 X 140mm to 356 X 356mm).
• Ejects and stacks in one smooth operation
• Works with documents from 5.5" x 5.5" to 8.5" x 14"
• 3 Year Manufacturer Warranty > Learn More -
Rhin-O-Tuff ONYX PAL-M Manual Paper Separator
GM-PDI-PALM_ONYXWith the ability to work with various types and sizes of paper, 5.5" x 5.5" to 8.5" x 14", the PAL-M manual paper separator is truly a one-of-a-kind module. A manual lift system, created for simple and easy adjustment allowing the operators to go at their own pace.
• Compatible with APES-14 attachments
• Fits firmly on any vertical OD or HD series machines
• Works with documents from 5.5" x 5.5" to 8.5" x 14"
• 3 Year Warranty > Learn More -
GW Slitter Cutter Creaser
GM-GWH-PT331SCCThe PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges
• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More -
GW PT335 Multi Slitter Cutter Creaser
GM-GWH-PT335SCCThe new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.
• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More -
GW PT8336 SCC Auto Feed/Slit Creasing System
GM-GWH-PT8336SCCThe PT 8336SCC Multi is a complete full-bleed finishing system designed for the digital marketplace. Equipped with interchangeable creasing/perfing dies, the PT 8336CC Multi can quickly switch from perfing to creasing to prevent digital toner cracking.
• 4" deep pile feeder
• Multi accessory output
• 9" color touchscreen
• Built in job creator and 64 job program memory
> Learn More -