Privacy Policy Cookie Policy Terms and Conditions

Challenge

Per Page

4900 Results

  • Challenge JF Single Spindle Drill

    GM-CMC-JF
    Challenge JF Single Spindle Drill

    • 2" Drilling Capacity
    • 13 Hollow Drill Bit Sizes
    • Foot Pedal Operation
    • Automatic Paper Chip Removal
    • Adjustable Margins
    • Auto Trip Side Guide
    • Built to Last

    Drill Head Operation Foot Pedal
    Drill Sizes Available 1/8" to 1/2" / 3 to 13 mm
    Maximum Drilling Capacity 2" / 51 mm
    Minimum Distance Between Holes w/ Adj. Stops 3/8" / 9.5 cm
    Minimum Distance Between Holes w/ Fixed Gauges 1/4" / 6 mm
    Adjustable Range - Drill to Side Guide 0 to 18-1/2" / 0 - 47 cm
    Adjustable Range - Drill to Backgauge 0 to 4" / 0 - 10 cm
    Side Guide Trip Automatic
    Cornering Capacity 1/2" / 13 mm
    Cornering Capacity (with Cornermatic) 1" / 2.5 cm
    Slit / V-slot Capacity 1/2" / 13 mm
    DIMENSIONS
    Table Size 19-1/2" x 31-1/2" / 49.5 x 80 cm
    Table Height 38" / 97 cm
    Overall Height 60" / 152 cm
    Floor Space Needed 32" x 42" / 81 x 107 cm
    Net Weight (approximate) 154 lbs / 69 kg
    Shipping Weight (approximate) 178 lbs / 80 kg
    ELECTRICAL
    Standard -

    1 Phase, 60 Hz, AC.   Spindle Motor: 1/4 HP.
    115 Volts, 5.3 Amps (service size 15 Amps)
    Issue rendering sage

    A manual, foot pedal operated drill with 2" drilling capacity. Auto-trip side guide for multi-hole patterns.

    • 2" Drilling Capacity
    • 13 Hollow Drill Bit Sizes
    • Foot Pedal Operation
    • Automatic Paper Chip Removal

  • Challenge 3-Head Hydraulic Paper Drill

    GM-CMC-EH_3C
    Challenge 3-Head Hydraulic Paper Drill
    Number of Drill Heads 3
    Drill Sizes Available (2" capacity) 1/8" to 1/2" / 3 to 13 mm
    Drill Sizes Available (2-1/2" capacity) 1/4" to 1/2" / 6 to 13 mm
    Range Between Drills 2-3/4" to 4-1/2" / 7 - 11 cm
    Range Between Outside Drills 5-1/2" to 9" / 14 - 23 cm
    Maximum Drilling Capacity 2-1/2" / 63 mm
    Strokes per Minute (adjustable) Up to 18
    Backgauge Adjustment 0 to 4-1/2" / 0 to 11 cm
    Vertical Adjustment of Individual Heads 1/4" / 6 mm
    DIMENSIONS
    Table Size 19-1/2" x 31-1/2" / 50 x 80 cm
    Table Height 37" / 94 cm
    Overall Height 59-1/4" / 151 cm
    Floor Space Needed 36" x 41-1/2" / 91 x 105 cm
    Net Weight (approximate) 520 lbs / 236 kg
    Shipping Weight (approximate) 570 lbs / 259 kg
    ELECTRICAL
    1 Phase, 60 Hz, AC.  Pump: 1/2 HP.   Spindle Motor: 1 HP.
    208 Volts, 18 Amps (service size 30 Amps) or
    230 Volts, 17 Amps (service size 30 Amps)
    UL Listed
    Issue rendering sage


    Powerful 3-Head Hydraulic Operation drill with fast and easy adjustments.

    - 2-1/2" Drilling Capacity
    - Fast and Easy Head Adjustments
    - Automatic Drill Return
    - Auto-Trip Side Guide (optional)

  • Challenge Multiple Spindle Drill W/3-Heads

    GM-CMC-MS_5
    Challenge Multiple Spindle Drill W/3-Heads

    • Multi-Hole Drilling - up to 5 Holes
    • Side Guide Adjustments
    • Backgauge Adjustments
    • Easy Drill Length Adjustment
    • 2" Hollow Drill Bits Available in 13 sizes
    • 2-1/2" Hollow Drill Bits Available in 4 sizes
    • Hollow Drill Bits Also Available With Teflon Coating

    Number of Drill Heads 2 to 5
    Drill Sizes Available (2" capacity) 1/8" to 1/2" / 3 to 13 mm
    Drill Sizes Available (2-1/2" capacity) 1/4" to 1/2" / 6 to 13 mm
    Center to Center Distance Maximum 15" / 38 cm
    Center to Center Minimum (standard) 1-7/8" / 48 mm
    Center to Center Minimum (optional narrow heads) 1-3/8 / 35 mm
    Maximum Drilling Capacity 2-1/2" / 63 mm
    Strokes per Minute (adjustable) Up to 18
    Backgauge Adjustment 0 to 5" / 0 to 13 cm
    Vertical Adjustment of Individual Heads 1/4" / 6 mm
    DIMENSIONS
    Table Size 17-3/4" x 34" / 45 x 87 cm
    Table Height 37" / 94 cm
    Overall Height 56" / 142 cm
    Floor Space Needed 36" x 36" / 92 x 92 cm
    Net Weight (approximate) 830 lbs / 374 kg
    Shipping Weight (approximate) 910 lbs / 410 kg
    ELECTRICAL
    Standard -

    1 Phase, 60 Hz, AC.   Pump: 1/2 HP.  Spindle Motor: 1-1/2 HP.
    208/230 Volts, 18 Amps (service size 30 Amps)
    Optional -

    3 Phase, 50 Hz, AC.   Pump: 1/2 HP.  Spindle Motor: 1-1/2 HP.
    208/230 Volts, 12 Amps (service size 20 Amps)
    Issue rendering sage

    Drilling of up to 5 holes (3 heads come standard) in a single stroke. Handle multiple hole patterns in a single stroke. 2½" drill capacity.

    • Side Guide Adjustments
    • Backgauge Adjustments
    • Easy Drill Length Adjustment
    • 2" Hollow Drill Bits Available in 13 sizes
    • 2-1/2" Hollow Drill Bits Available in 4 sizes

  • Challenge Multi Spindle Drill

    GM-CMC-MS_10A
    Challenge Multi Spindle Drill

    • High Production Multi-Hole Drilling
    • Drills Up To 10 Holes in One Stroke
    • Maximum Drill Bit Diameter 1/2"
    • 2-1/2" Drilling Capacity
    • Powerful Hydraulic Operation
    • Easy Head Adjustment
    • Variable Speed Stroke Control
    • Automatic Paper Chip Removal
    • Rugged Cast Iron Construction
    • Flexible Side Guide Adjustments
    • Multi-Splined Drive Shaft
    • Backgauge Adjustments
    • Lighted Work Surface

    Maximum Number of Drill Heads 10 Heads
    Drill Sizes Available** (2" capacity) 1/8" to 1/2" / 3 to 13 mm
    Drill Sizes Available (2-1/2" capacity) 1/4" to 1/2" / 6 to 13 mm
    Center to Center Distance Maximum 21" / 53 cm
    Center to Center Distance Minimum*** 1-1/4" / 3.2 cm
    Minimum Distance Between Holes w/ Adj. Stops 3/8" / 9.5 cm
    Minimum Distance Between Holes w/ Fixed Gauges 1/4" / 6 mm
    Maximum Drilling Capacity 2-1/2" / 6.35 cm
    Strokes per Minute (adjustable) 18 to 26
    Backgauge Adjustment 0 to 9" / 0 to 23 cm
    Vertical Adjustment of Individual Heads 1/4" / 6 mm
    DIMENSIONS
    Table Size 24" x 36" / 61 x 91 cm
    Table Height 38" / 96.5 cm
    Overall Height 60" / 152 cm
    Floor Space Needed 35" x 40" / 89 x 102 cm
    Net Weight (approximate) 1350 lbs / 675 kg
    Shipping Weight (approximate) 1660 lbs / 830 kg
    ELECTRICAL
    Standard -

    3 Phase, 60 Hz, AC.   Pump: 3/4 HP.  Spindle Motor: 3 HP.
    208 Volts, 14 Amps (service size 20 Amps) or
    230 Volts, 12.8 Amps (service size 20 Amps) or
    460 Volts, 6.6 Amps (service size 15 Amps)
    Optional -

    1 Phase, 60 Hz, AC.   Pump: 3/4 HP.  Spindle Motor: 3 HP
    208 Volts, 26.5 Amps (service size 40 Amps) or
    230 Volts, 24.2 Amps (service size 40 Amps)

    ** Special large hole drilling (up to 1-3/4" in diameter) is possible with conversion kit.
    *** Three hole drilling heads are available for drilling 3 holes in 1" centers.
    Issue rendering sage

    High production and heavy-duty drilling of up to 10 holes in a single stroke makes the MS-10 the ultimate drilling machine.

    • Drills Up To 10 Holes in One Stroke
    • Maximum Drill Bit Diameter 1/2"
    • 2-1/2" Drilling Capacity
    • Powerful Hydraulic Operation

  • Challenge Cornering Machine (Hydraulic)

    GM-CMC-SCM
    Challenge Cornering Machine (Hydraulic)

    The Challenge hydraulic powered Single Cornering Machine delivers up to ten times more cornering capacity than electric powered table-top models in the market. The SCM’s powerful hydraulic system and robust knives easily handle difficult stocks such as index cards and coated materials. The shear cutting mechanism preserves knife sharpness and maintains high quality cuts. Designed and built in Michigan - USA, the Challenge SCM is a valuable machine for any print shop. Also available in a manual model for lower capacity requirements.

    FEATURES

    • Handles any size sheet

    • Gravity chip disposal with large waste bin

    • 6 sizes of cornering knives to choose from

    HYDRAULIC MODEL

    • 4” / 10 cm stack height

    • Hydraulic powered cutting

    • Plexiglass safety shield

    • Energy saving motor turns off between cycles

    MANUAL MODEL

    • 2” / 5 cm stack height

    • Foot activated cutting

    Maximum Lift Height 4" / 10 cm
    Range of Lift Widths Open
    Corner Sizes Handled 1/8" to 5/8" / 3 - 16 mm
    DIMENSIONS
    Table Depth 24" / 6 cm
    Table Width 20-1/4" / 51.5 cm
    Table Height 36" / 91 cm
    Overall Height 52" / 132 cm
    Floor Space Needed 24" x 20-1/4" / 61 x 51.5 cm
    Net Weight (approximate) 190 lbs / 86 kg
    Shipping Weight (approximate) 265 lbs / 120 kg
    ELECTRICAL
    1 Phase, 60 Hz, AC.   Pump: 1/2 HP
    115 Volts, 13.5 Amps (service size 20 Amps)

    Issue rendering sage

    The Challenge hydraulic powered Single Cornering Machine delivers up to ten times more cornering capacity than electric powered table-top models in the market.

    • 6 Sizes of Cornering Blades
    • Handles Any Size Sheet
    • 4" Lift Capacity
    • Precise Cutting Action
    • Gravity Chip Disposal

  • Challenge Handy Padder

    GM-CMC-HANDYPADDER
    Challenge Handy Padder
    • Easy Operation
    • Large Capacity
    • Self-Aligning Gravity Load
    • Fast Lock & Release Clamping
    • Table-Top Design
    • Superior Quality - All Steel Construction
    • Stable - Rear Support To Prevent Tipping
    • Self Locking Swivel Table
    • Portable

     

    Portable/Compact & Economical

    Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price. The convenient turn style base of the Handy-Padder allows the operator to load, clamp and pad from a single position.

     

    Stabilized Base

    The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.

     

    Simple 1-2-3 Operation

    Ease of operations turns padding service into a value-added profit center.

     

    1- Lock & Load

    Lock the removable plate in place. The 8° table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 8,000 8-1/2" x 11" sheets of 20# bond - even more with smaller sheets.

     

    2- Clamp

    After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top of your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.

     

    3 - Turn & Pad

    Turn the table around and remove the plate for complete access to your padding.

     

    Products Working for You

    The Handy-Padder is just one in the line of Challenge products engineered to make your job easier.

     

    Maximum Lift Width 17-3/4" / 45 cm
    Maximum Lift Height 16" / 40.6 cm
    Lift Depth 4" to 13+" / 10 cm to 33+ cm
    Sample Capacity 8,000 8-1/2 x 11" 20# bond

     

    DIMENSIONS

    Overall Base Area 20-15/16" / 53.2 cm
    Overall Height 26-3/16" / 66.5 cm
    Overall Length 17-1/32" / 43.3 cm
    Net Weight (approximate) 50 lbs / 22.7 kg
    Shipping Weight (approximate) 55 lbs / 25 kg

     

     

    Issue rendering sage

    The Challenge HANDY PADDER design provides a portable and compact table top padding device for the right price.

    • Easy 1-2-3 Operation
    • Large capacity
    • Self-aligning gravity load
    • Table-top design

  • Challenge Paddy Wagon Padding Press

    GM-CMC-PAD_WAG
    Challenge Paddy Wagon Padding Press

    FEATURES

    • Easy 1-2-3 Operation
    • High Capacity
    • Portable-heavy capacity coasters
    • Wielded tubular steel construction

    BENEFITS

    1) Clean and portable

    2)  Easy to use - 

    Step 1: Tilt & Load

    Step 2: Clamp

    Step 3: Tilt & Pad

     

    Maximum Lift Width 23-1/2" / 60 cm
    Maximum Lift Height 31" / 79 cm
    Lift Depth 3" to 17"+ / 8 to 43+ cm
    Sample Capacity 15,000 8-1/2" x 11" 20# bond /
    15,000 A4  75g/m2
    DIMENSIONS
    Pass-Through Door Size 32" / 80 cm
    Overall Base Area 30" x 30" / 76 x 76 cm
    Overall Height 66-1/2" / 170 cm
    Net Weight (approximate) 100 lbs / 45 kg
    Shipping Weight (approximate) 120 lbs / 55 kg
     

    Issue rendering sage

    Turn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad

    • Sample capacity 15,000 8-1/2 x 11” Sheets
    • Portable
    • Heavy-duty casters
    • Welded tubular steel construction

  • Challenge Handy Cart

    GM-CMC-HANDYCART
    Challenge Handy Cart
    • 500 lb. Capacity
    • Large, 5" swivel casters for easy rolling
    • Holds (4) piles of 11" x 17" up to 21" tall
    • Four conveniently located handles
    • Full-size lower shelf with sides to prevent items from sliding off

     

    Printers & Copy Centers

    • Near the press or printer for stacking stock and printed jobs
    • By the cutter for handling stock before and after trimming
    • With the binder and trimmer to place completed jobs

     

    Mail Room & Offices

    • Store office supplies and route mail with your Handy-Cart

     

    Mobility & Control

    • Four 5" hard rubber swivel casters and four handles make the Handy-Cart easy to control and roll from place to place

     

    Keeping Stock Square

    • Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations

     

    Products Working for You

    • The Handy-Cart is another great product value from Challenge! All of our products are engineered to make your job easier
    Shelf Dimensions 11"x17"x21" tall / 28x43x53 cm
    Lower Shelf Dimensions 22" x 34" / 56 cm x 86 cm
    Lower Shelf Height Capacity 13-7/16" / 34 cm
    Truck Capacity 500 lbs. / 227 kg

     

    DIMENSIONS

    Length 34/16" / 87.2 cm
    Width 22" / 56 cm
    Height 41-11/32" / 105 cm
    Net Weight (approximate) 72 lbs. / 32.7 kg
    Shipping Weight (approximate) 90 lbs. / 40.8 kg

    Issue rendering sage

    Incredibly helpful for the busy print shop. Shipped in one piece, the Handy Cart is constructed of heavy gauge, welded steel. Made in the USA.

    • Holds 4 piles of 11"x17" stock up to 21" tall
    • 500lbs Total Capacity
    • Portable- Four 5" swivel casters for easy rolling
    • Full size lower shelf with lip

  • Challenge PakRak II

    GM-CMC-PAK_RAK
    Challenge PakRak II
    • Holds 11" x 17" (28 x 43 cm) Stock
    • 500 lb (227 kg) Total Capacity
    • 12 Shelves - 4 Fixed / 8 Adjustable
    • Portable - Heavy-duty Industrial Casters
    • Side Handles
    • Solid Construction
    Shelf Dimensions 10-3/4" x 16-3/4" / 27 x 43 cm
    Number of Shelves - Fixed 4
    Number of Shelves - Adjustable Up to 12 (8 Standard)
    Shelf Capacity 75 lbs / 227 kg
    Maximum Total Capacity 500 lbs / 227 kg
    DIMENSIONS
    Length 38" / 97 cm
    Width 26" / 66 cm
    Height 52" / 132 cm
    Net Weight (approximate) 170 lbs / 77 kg
    Shipping Weight (approximate) 185 lbs / 83 kg

    Issue rendering sage

    Heavy duty construction with side handles. Holds up to 11" x 17" (28 x 43 cm) Stock.

    • 500 lb (227 kg) Total Capacity
    • 12 Shelves - 4 Fixed / 8 Adjustable
    • Portable - Heavy-duty Industrial Casters
    • Also available in XL

  • Challenge PakRak XL

    GM-CMC-PAK_RAK_XL
    Challenge PakRak XL
    • Holds 14" x 20" (28 x 43 cm) Stock
    • 500 lb (227 kg) Total Capacity
    • 12 Shelves - 4 Fixed / 8 Adjustable
    • Portable - Heavy-duty Industrial Casters
    • Side Handles
    • Solid Construction
    Shelf Dimensions 10-3/4" x 16-3/4" / 27 x 43 cm
    Number of Shelves - Fixed 4
    Number of Shelves - Adjustable Up to 12 (8 Standard)
    Shelf Capacity 75 lbs / 227 kg
    Maximum Total Capacity 500 lbs / 227 kg

     

    DIMENSIONS

    Length 38" / 97 cm
    Width 26" / 66 cm
    Height 52" / 132 cm
    Net Weight (approximate) 170 lbs / 77 kg
    Shipping Weight (approximate) 185 lbs / 83 kg

    Issue rendering sage

    The Pak-Rak XL an invaluable cart for the high volume printer. Place near printer for stacking, organizing, storing for pre- and post- print production.

    • Holds 14"x20" stock
    • 12 shelf surfaces.
    • Optional: 4 additional shelves
    • 500lbs total capacity

  • Challenge Handy Jog

    GM-CMC-HANDYJOG
    Challenge Handy Jog
    • Front side loading
    • 2 tray sizes: Standard (8.5" x 11") and Large (11" x 17")
    • Powerful jogging action
    • Quiet operation
    • Maintanence free drive mechanism
    • Optional "Instant On" footswitch
    • UL listed

     

    Pile Height 3" maximum
    Stock Size up to 11" x 17"

     

    DIMENSIONS

    Tray Dimensions 11" x 13-1/2"
    Width 16-1/2"
    Height 14-29/32"
    Depth 9-1/4"
    Net Weight (approximate) 15 lbs.
    Shipping Weight (approximate) 17 lbs.
    Electrical 120V, single-phase, 60 Hz

    Issue rendering sage

    The Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.

    • Front side loading
    • Powerful jogging action
    • Quiet operation
    • 2 sizes: Standard (8.5"x11") and Large (11" x 17")

  • Challenge Handy Jog-Large

    GM-CMC-HANDYJOG_LT
    Challenge Handy Jog-Large
    • Front side loading
    • 2 tray sizes: Standard (8.5" x 11") and Large (11" x 17")
    • Powerful jogging action
    • Quiet operation
    • Maintanence free drive mechanism
    • Optional "Instant On" footswitch
    • UL listed
    Pile Height 3" maximum
    Stock Size up to 11" x 17"

     

    DIMENSIONS

    Tray Dimensions 11" x 13-1/2"
    Width 16-1/2"
    Height 14-29/32"
    Depth 9-1/4"
    Net Weight (approximate) 15 lbs.
    Shipping Weight (approximate) 17 lbs.
    Electrical 120V, single-phase, 60 Hz

    Issue rendering sage

    The Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.

    • Front side loading
    • Powerful jogging action
    • Quiet operation
    • 2 sizes: Standard (8.5"x11") and Large (11" x 17")
To top