Categories: Finishing
- Banding Machines (8)
- Carton Sealers (16)
- Collators & Booklet Makers (9)
- Corner Rounders (1)
- Guillotine Paper Cutters (9)
- Die Cutters (12)
- Drills & Hole Punches (5)
- Folders & Creasers (7)
- Laminators & Foiling (3)
- Perfect Binders & Book Trimmers (5)
- Shrink Wrap (4)
- Slitter-Cutter-Creaser (1)
- Other (8)
Filter Results
- Manufacturer
-
- Morgana
- Preferred Pack
- Challenge
- Amerilam
- Valiani
- MBM (39)
- Akiles (35)
- Horizon (34)
- FastBind (10)
- Graphic Whizard (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Vivid Matrix (3)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Bauman (1)
- GBC (1)
- Martin Yale (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- TEC Lighting (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
Morgana DigiBook 450 PUR Perfect Binder
GM-MSY-DIGIBOOK450Similar to the 300XL, the 450 is high productivity model ideally suited for short to medium runs of PUR perfect bound books.
• 450 books per hour
• Touch screen operation
• Pneumatic opening and closing of clamp
• Binding length (spine) from 3.93” up to 17.71”
• Equipped with an automatic book delivery
> Learn More -
Challenge CMT-130TC Book Trimmer
GM-CMC-130TC
The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TC
The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
Excel PreCombo L'Sealer-Compact 110V
GM-PPS-1519ECMC
This compact L’Sealer with Magnetic Hold down and power discharge conveyor with attached Tunnel is only 74 inches in total length. A great machine for low to medium production speeds of 8 to 12 packages per minute.
• Available in 110 volts or 220 volts
• Seal dimension 15 x 19”
• Tunnel dimension 20 x 16 x 6”
• Cycle speed 12 pkgs. per minute > Learn More -
Preferred Pack 1622MK Combo w/Micro Knife
GM-PPS-1622MK_COMBO
This fully adjustable combination L’Sealer with attached Shrink Tunnel includes the latest “Micro-Knife” Technology - No more seal wires to replace.
• Uni-body frame makes this unit easy to move around
• Seal dimension 16 x 22”
• Tunnel dimension 28 x 18 x 8”
• Cycle speed 15 pkgs. per minute" > Learn More -
Combo Fully Automated L'Sealer & Tunnel
GM-PPS-5600COMBO
Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.
• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More -
5300 Combo Fully Automated L'Sealer & Tunnel
GM-PPS-5300COMBO
Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.
• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More -
Morgana AutoCut Pro
GM-MSY-AUTOCUTPRO
The AutoCut Pro delivers the benefits of three functions in one – highly accurate cutting and slitting and high speed creasing in an easy to use system. Link the AutoCut Pro to the Morgana AutoFold for easy cutting, creasing and folding!
• 150 job recall
• Up to 5000 letter sheets per hour when creasing
• 4” Touchscreen operation
• Skew Adjustment > Learn More -
Challenge Paddy Wagon Padding Press
GM-CMC-PAD_WAG
Turn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad
• Sample capacity 15,000 8-1/2 x 11” Sheets
• Portable
• Heavy-duty casters
• Welded tubular steel construction > Learn More -
Challenge PakRak II
GM-CMC-PAK_RAK
Heavy duty construction with side handles. Holds up to 11" x 17" (28 x 43 cm) Stock.
• 500 lb (227 kg) Total Capacity
• 12 Shelves - 4 Fixed / 8 Adjustable
• Portable - Heavy-duty Industrial Casters
• Also available in XL
> Learn More -
Challenge Handy Padder
GM-CMC-HANDYPADDER
The Challenge HANDY PADDER design provides a portable and compact table top padding device for the right price.
• Easy 1-2-3 Operation
• Large capacity
• Self-aligning gravity load
• Table-top design
> Learn More -
Challenge PakRak XL
GM-CMC-PAK_RAK_XL
The Pak-Rak XL an invaluable cart for the high volume printer. Place near printer for stacking, organizing, storing for pre- and post- print production.
• Holds 14"x20" stock
• 12 shelf surfaces.
• Optional: 4 additional shelves
• 500lbs total capacity
> Learn More
![](/assets/images/defaults/ajax-loader.gif)