Shop finishing equipment at Print & Finishing Solutions.

This fully adjustable combination L’Sealer with attached Shrink Tunnel includes the latest “Micro-Knife” Technology - No more seal wires to replace.

• Uni-body frame makes this unit easy to move around
• Seal dimension 16 x 22”
• Tunnel dimension 28 x 18 x 8”
• Cycle speed 15 pkgs. per minute" > Learn More

Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.

• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More

Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.

• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More

Save time and money with the Akiles CardMac Pro Business Card Slitter! Quickly create your own custom business cards at a low cost and without leaving the comfort of your home office.

• Full Bleed Cards
• 6 Preset Sizes + Custom Setting
• Single Pass Design > Learn More

The PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges

• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More

AEROCUT NANO is the card cutter that can take up to 350gsm stock. It feeds, slits and cross cuts to finish prints into business cards, post cards, flyers and more.

• Intuitive touch screen display
• Stable air suction feed system
• 16 pre-programmed jobs and 40 customized jobs
• Paper weight - 120-350 gsm, depending on paper quality > Learn More

The MBM AeroCut NanoMax stands out with its quick and easy tool-free slitter position settings, enhanced by four InstaSet Bars and a new Fine Adjustment Knob for precise control. It boasts a user-friendly color touch screen and comes pre-programmed with 31 jobs, while also offering the capacity to store up to 80 additional custom programs, including Flex Mode programs.

• Patented Tri-Suction Feeder
• Intuitive Touch Screen UI
• Versatile InstaSet Bar System > Learn More

The AutoCut Pro delivers the benefits of three functions in one – highly accurate cutting and slitting and high speed creasing in an easy to use system. Link the AutoCut Pro to the Morgana AutoFold for easy cutting, creasing and folding!

• 150 job recall
• Up to 5000 letter sheets per hour when creasing
• 4” Touchscreen operation
• Skew Adjustment > Learn More

The new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.

• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More

The Aerocut Prime is an ideal solution for finishing, especially for short-run digitally printed applications, such as business cards, post cards, invitations, greeting cards, leaflets, tickets and more. It features 2 single blade slitters to trim top & bottom margins, and 2 double blade slitters for center gutters and precise accuracy. The durable blades cut stocks up to 400 gsm.

• Sheet Capacity: 4”
• Paper Size: 8.27” x 8.27” – 14.5” x 47”+
• Speed: 24 sheets/min
• New Lytrod Intellicut software included
• 15,120 business cards/hr / 6,720 post cards/hr / 1,260 folding leaflet/hr > Learn More

The Aerocut Velocity slitter/cutter/creaser features enhanced productivity and user- friendliness. Patented “Tri-Suction Feeding Mechanism” reduces risks of double feeds and mis-feeds. Creasing pressure can be adjusted in 5 levels instantly by shifting the lever.

• Sheet Capacity: 4” (vs. Classic Capacity: 2 ¼”)
• Speed: 20 sheets/min (vs. Classic Speed: 12 sheets)
• New Lytrod Intellicut software included
• Paper Size: 8. ¼” x 8. ¼” – 14½”x 47”+ (vs. Classic: 8 ¼” x 8 ¼” – 14 3/8” x 20 ½”+) > Learn More

The PT 8336SCC Multi is a complete full-bleed finishing system designed for the digital marketplace. Equipped with interchangeable creasing/perfing dies, the PT 8336CC Multi can quickly switch from perfing to creasing to prevent digital toner cracking.

• 4" deep pile feeder
• Multi accessory output
• 9" color touchscreen
• Built in job creator and 64 job program memory
> Learn More